Clearance - Aromatherapy Beeswax - Pillar Candle

Description

These factory 2nd pillars have small cosmetic flaws that you probably won't even notice. They will burn beautifully.

Our Botanica pillars are made with 100% beeswax and pure essential oils. Our lightly filtered beeswax is sweetly aromatic on its own - with this in mind, we have chosen essential oils which blend seamlessly into this luxurious base to create inspiring scents. These factory seconds may have aesthetic blemishes, but will burn perfectly.

Features

• 100% pure beeswax; 100% pure essential oils
• Cotton wick - no lead or metal
• Paraffin-free, non-toxic & hypoallergenic
• Average TOTAL burn times for our pillars (see Candle Care pamphlet/ instructions on bottom of candle for tips to get the best and longest burn from your beeswax candle):
  2" x 3" ~25 hours
  2" x 4.5" ~36 hours
  3" x3" ~50 hours
  3" x 4" ~60 hours
  3" x 6" ~90 hours
  

Dimensions & Care

2” Dia. Pillars:

• Trim wick to 1/4" before each lighting.
  
• To avoid dripping, burn for no longer than 1 hour at a time. 
  
• To eliminate smoke when extinguishing the flame, use a tool to drip wax from the molten pool onto the burning wick.

3” Dia. Pillars:

• Trim wick to 1/4" before each lighting.
• To avoid tunneling, burn for at least 3 hours per burn and mold the warm sides in toward the flame. This will melt the walls, utilizing all of the available fuel, and thus extend the overall burn time. It will also raise the molten wax level, and shrink any over-sized flame.
• To prevent uneven burning and potential dripping, use a metal tool to redirect a curled or angled wick to the opposite direction. To prevent wick breakage when doing this, be sure to nudge the wick below the level of the molten pool where the wick is not burned and thus stronger.
• To eliminate smoke when extinguishing the flame, use a tool to drip wax from the molten pool onto the burning wick.